Inpool & A-Frame Swimming Pool Ladders

• Aesthetically pleasing contemporary design in beautiful warm gray color
  
• Large 5 inch x 18 inch wide Comfortreads
  
• Curved side rails designed with strength in mind
  
• Inner side rails include integrated side barriers to prevent entry behind the ladder
• Easy assembly with minimal hardware
  
• Adjusts to fit pools 48” to 56” tall
  
• Lockable Roll-Guard Barrier (lock included)
  
• Extra large top platform
  
• Just fill side rails with water to prevent floating, no sand or bricks needed
• Fits pool top seats up to 14 inches wide
  
• Will not work with EZ Set inflatable pools
• MSRP: $299.99

• One SKU fits 48" to 54" aboveground pools:Adjustability is made by simply moving side braces up or down depending on pool height.
  
• Heavy duty construction: Unique one piece handrail/leg design will hold 300lbs.
  
• Five evenly spaced steps make climbing the ladder easier:
  Most other adjustable ladders increase the space between the bottom step and the next step when installed in a 53" or 54" pool.
  
• Outer steps swing up and lock into upright position:
  Some building inspectors now require this instead of a lift-off ladder section.
  
• No sand required; just fill with water to prevent floating. Most other ladders use a bag filled with sand.
  
• Converts to an inpool ladder with optional CK100 Kit: Just cut ladder to desired length.
  
• Two tone color: white and grey: Complements today's pools
  
• Competitively priced: Compare all of our features with other manufacturers' ladders.
  
• Safety first: Ladder now comes complete with a padlock for added safety benefit.
  
• # 7000-EXT Extension kit available for 56" tall pools.
  
• Features an anti-entrapment barrier
  
• Weight guideline: 300 lbs.
• Will not work with EZ Set inflatable pools
• MSRP: $289.99

• Economical, yet full-featured
  
• Fits 48” to 54” pools
  
• Snap-lock treads for quick, easy assembly
  
• Swing-up outer section inhibits unauthorized access to pool
  
• Outer treads can be padlocked (lock included)
  
• 16” tread width
  
• No sand or bricks required; just fill with water
  
• Available in white
  
• Convertible to Inpool ladder with otional CK-7100W conversion kit
  
• Features an anti-entrapment barrier
  
• Weight guideline: 300 lbs.
• Will not work with EZ Set inflatable pools
• MSRP: $229.99

• Deluxe heavy-duty in-pool ladder
  
• Totally adjustable for deck heights from 46" to 56"
  
• 5" x 18" wide
  
• Flat treads for easier climbing
  
• Includes deck platform
  
• White side rails with grey treads for high visibility.
  
• No sand required.
  
• Features an anti-entrapment barrier
  
• Optional #6000-EXT Extension Kit available to extend ladder to approximately 68 inches
  
• Weight guideline: 300 lbs.
• MSRP: $189.99

• Economical yet full-featured
  
• Fits decks up to 54” high
  
• Snap-lock treads for quick, easy assembly
  
• 16” tread width
• No sand or bricks required; just fill with water
  
• Available in white
  
• Features an anti-entrapment barrier
  
• Optional #6100-EXT Extension Kit available to extend ladder to approximately 66 inches
  
• Weight guideline: 300 lbs.
• MSRP: $149.99

All of the above ladders now feature an anti-entrapment barrier. This Safety device meets the new ANSI/NSPI standard that states: "A ladder manufacturer shall provide a means to inhibit child entrapment between the ladder and pool wall and through the risers."

• Available for pre-2005 ladders.

• Straight Up and Down Inpool
  
• Does not require barrier
  
• Adjusts to fit deck heights 46" to 56"
  
• For decks higher than 56" use # EB100
  
• 18" Width; 22" High handrails
  
• Weight guideline: 250 lbs
  
• One year full warranty
• MSRP: $109.99

• A-Frame Replacement Ladder for 36" Splasher Pools
  
• Suitable for children and most adults up to about 225 lbs
  
• 13" wide step; 9" high handrail; 4-1/2 handrail span
  
• Easy assembly
• Will not work with EZ Set inflatable pools
• MSRP: $89.99